First aid regulations vary by province and other factors such as type of industry, the potential for hazard, proximity to a medical facility, and the number of workers per shift.

Designed to comply with CSA Standard Z1220-17

40 Fabric Strip Bandage, 7.5 x 2.2cm
24 Plastic Strip Bandage, 7.5 x 2cm
12 Fabric Knuckle Bandage, 7.5 x 3.75cm
12 Fabric Patch Bandage, Large, 5 x 7.5cm
12 Fabric Fingertip Bandage, Large, 7.5 x 4.5cm
4 Gauze Pads, 7.5 x 7.5cm,12/Bag
8 Compress Bandage, 10 x 10cm
4 BZK Antiseptic Towelettes, 25/Bag
2 Hand Wipes, 12/Bag
2 Cloth Tape, 2.5cm x 4.5m
4 Conform Bandage, 5cm x 4.5m
4 Conform Bandage, 7.5cm x 4.5m
2 Bio-hazard Red Bag, 60 x 60cm
16 Disposable Nitrile Gloves, Large, 1 Pair/Bag
8 Triangular Cotton Bandage, w/ Pins,102 x 102 x 142cm
1 Straight Splinter Forceps, 11.5cm
1 Bandage Scissors, 14cm
1 CPR-Aid Rescuer Device, Single Use
1 Emergency Survival Blanket, 213 x 132cm
2 Sterile Abdominal/Combine Pad, 12.5 x 22.5cm
24 Bacitracin Antibiotic Ointment, 0.9g*
Refill kits are available for this first aid kit.

First aid regulations vary by province and other factors such as type of industry, potential for hazard, proximity to a medical facility and the number of workers per shift.

Designed to comply with CSA Standard Z1220-17

10 Plastic Strip Bandage, 7.5 x 2cm
6 Fabric Strip Bandage, 7.5 x 2.2cm
3 Fabric Knuckle Bandage, 7.5 x 3.75cm
3 Fabric Patch Bandage, Large, 5 x 7.5cm
3 Fabric Fingertip Bandage, Large, 7.5 x 4.5cm
1 Gauze Pads, 7.5 x 7.5cm, 12/Bag
1 Gauze Pads, 10 x 10cm, 6/Bag
1 Compress Bandage, 10 x 10cm
1 Compress Bandage, 15 x 15cm
1 BZK Antiseptic Towelettes, 25/Bag
1 Hand Wipes, 6/Bag
1 Cloth Tape, 2.5cm x 4.5m
1 Conform Bandage, 5cm x 4.5m
1 Conform Bandage, 7.5cm x 4.5m
2 Bio-hazard Red Bag, 60 x 60cm
4 Disposable Nitrile Gloves, Large, 1 Pair/Bag<
2 Triangular Bandage, Cotton, c/w Pins, 102 x 102 x 142cm
1 Bandage Scissors, 14cm
1 Straight Splinter Forceps, 11.5cm
1 CPR-Aid Rescuer Device, Single Use
1 Elastic Support Bandage, 7.5cm x 4.5m
1 Emergency Survival Blanket, 213 x 132cm
1 Non-Adherent Pads, 5 x 7.5cm, 4/Bag
1 Sterile Abdominal/Combine Pad, 12.5 x 22.5cm
1 Instant Cold Pack, Small
1 Windlass Tourniquet
2 Eye Dressing Kit (1-Eye Pad, 1-Eye Shield)
1 Flat Fold Splint, 61 x 11cm
1 Glucose Tablets, 4g, 10/Pack
6 Bacitracin Antibiotic Ointment, 0.9g*
Refill kits are available for this first aid kit.

First aid regulations vary by province and other factors such as type of industry, the potential for hazard, proximity to a medical facility, and the number of workers per shift.

Designed to comply with CSA Standard Z1220-17

20 Plastic Strip Bandage, 7.5 x 2cm
12 Fabric Strip Bandage, 7.5 x 2.2cm
6 Fabric Knuckle Bandage, 7.5 x 3.75cm
6 Fabric Patch Bandage, Large, 5 x 7.5cm
6 Fabric Fingertip Bandage, Large, 7.5 x 4.5cm
2 Gauze Pads, 7.5 x 7.5cm, 12/Bag
1 Gauze Pads, 10 x 10cm, 12/Bag
2 Compress Bandage, 10 x 10cm, 1/Box
2 Compress Bandage, 15 x 15cm, 1/Box
2 BZK Antiseptic Towelettes, 25/Bag
1 Hand Wipes, 12/Bag
1 Cloth Tape, 2.5cm x 4.5m
2 Conform Bandage, 5cm x 4.5m
2 Conform Bandage, 7.5cm x 4.5m
4 Bio-hazard Red Bag, 60 x 60cm
8 Disposable Nitrile Gloves, Large, 1 Pair/Bag
4 Triangular Bandage, Cotton, c/w Pins, 102 x 102 x 142cm, 1/Box
1 Bandage Scissors, 14cm
1 Straight Splinter Forceps, 11.5cm
1 CPR-Aid Rescuer Device, Single Use
2 Elastic Support Bandage, 7.5cm x 4.5m
2 Emergency Survival Blanket, 213 x 132cm
2 Non-Adherent Pads, 5 x 7.5cm, 4/Bag
2 Sterile Abdominal/Combine Pad, 12.5 x 22.5cm
2 Instant Cold Pack, Small, 1/Box
1 Windlass Tourniquet
2 Eye Dressing Kit (1-Eye Pad, 1-Eye Shield)
1 Flat Fold Splint, 61 x 11cm
2 Glucose Tablets, 4g, 10/Pack
12 Bacitracin Antibiotic Ointment, 0.9g*
Refill kits are available for this first aid kit.

First aid regulations vary by province and other factors such as type of industry, the potential for hazard, proximity to a medical facility, and the number of workers per shift.

Designed to comply with CSA Standard Z1220-17

40 Plastic Strip Bandage, 7.5 x 2cm
24 Fabric Strip Bandage, 7.5 x 2.2cm
12 Fabric Knuckle Bandage, 7.5 x 3.75cm
12 Fabric Patch Bandage, Large, 5 x 7.5cm
12 Fabric Fingertip Bandage, Large, 7.5 x 4.5cm
4 Gauze Pads, 7.5 x 7.5cm, 12/Bag
2 Gauze Pads, 10 x 10cm, 12/Bag
4 Compress Bandage, 10 x 10cm
4 Compress Bandage, 15 x 15cm
4 BZK Antiseptic Towelettes, 25/Bag
2 Hand Wipes, 12/Bag
2 Cloth Tape, 2.5cm x 4.5m
4 Conform Bandage, 5cm x 4.5m
4 Conform Bandage, 7.5cm x 4.5m
8 Bio-hazard Red Bag, 60 x 60cm
16 Disposable Nitrile Gloves, Large, 1 Pair/Bag
8 Triangular Bandage, Cotton, c/w Pins, 102 x 102 x 142cm
1 Bandage Scissors, 14cm
1 Straight Splinter Forceps, 11.5cm
1 CPR-Aid Rescuer Device, Single Use
2 Elastic Support Bandage, 7.5cm x 4.5m
2 Emergency Survival Blanket, 213 x 132cm
4 Non-Adherent Pads, 5 x 7.5cm, 4/Bag
4 Sterile Abdominal/Combine Pad, 12.5 x 22.5cm
4 Instant Cold Pack, Small
1 Windlass Tourniquet
4 Eye Dressing Kit (1-Eye Pad, 1-Eye Shield)
2 Flat Fold Splint, 61 x 11cm
2 Glucose Tablets, 4g, 10/Pack
24 Bacitracin Antibiotic Ointment, 0.9g*
Refill kits are available for this first aid kit.

– Energy Efficient LED 4w
– Dual Voltage Input Capability 120/347 VAC
– Come Standard With Green Pictogram
– Ceiling, Wall Or End Mount Installation
– Injection Molded Off-white Thermoplastic
– Fast Installation With Snap Together Design
– Red Led Monitor Charger
– Test Switch On The Side For Easy Access
– Fully Automatic Solid State Charger
– Duration 90 Minutes Battery Backup
– Green Pictogram
– Standard Warranty 1 Year

– Energy Efficient LED 4.0w
– Dual Voltage Input Capability 120/347 VAC
– Come Standard With Green Pictogram
– Ceiling, Wall Or End Mount Installation
– Powder Coat Steel Housing Painted White
– 2 Adjustable Floodlight Heads x 1.2w
– Fast Installation With Snap Together Design
– Red Led Monitor Charger
– Test Switch On The Side For Easy Access
– Fully Automatic Solid-state Charger
– Duration 90 Minutes Battery Backup
– Working Temperature 0ºc – 40ºc
– Standard Warranty 1 Year

– Energy Efficient LED 4.0w
– Dual Voltage Input Capability 120/347 VAC
– Come Standard With Green Pictogram
– Ceiling, Wall Or End Mount Installation
– Powder Coat Steel Housing Painted White
– Fast Installation With Snap Together Design
– Red Led Monitor Charger
– Test Switch On The Side For Easy Access
– Fully Automatic Solid-state Charger
– Duration 90 Minutes Battery Backup
– Working Temperature 0ºc – 40ºc
– Standard Warranty 1 Year

– Energy Efficient LED 4w
– Dual Voltage Input Capability 120/347 VAC
– Come Standard With Green Pictogram
– Ceiling, Wall Or End Mount Installation
– Injection Molded Off-white Thermoplastic
– Fast Installation With Snap Together Design
– Two Heads Light 1.2w Each Fully Adjustable
– Red Led Monitor Charger
– Test Switch On The Side For Easy Access
– Fully Automatic Solid State Charger
– Duration 90 Minutes Battery Backup
– Green Pictogram
– Standard Warranty 1 Year

– Emergy Efficient LED 3w
– Dual Voltage Input Capacility 120/347VAC
– Injection Molded Off-white Thermo Plastic
– Fast Installation With Snap-together Design
– Red Led Monitor Charger
– Test Switch Under Housing For Easy Access
– Fully Automatic Solid State Charger
– Duration 90 Minutes Battery Back Up
– Adjustable Lamp Heads For Full Direction
– Two Led Lamps 2×1.5w/each
– Standard Warranty 1 Year

Emergency Light, White, 11.8 x 5.1 x 2.4″, 2 x 1.5W ,120/347V

The FW105 features one addressable loop circuit (SLC) with 252 addressable devices/points as well as 6 auxiliary function buttons and 12 LED indicators.

Capabilities
Network supports up to 32 panels (Class X) or 109 remote annunciators or panels (Class B)

Compliance
UL/ULC Listed

Built-In Annunciator
Built-in 30 LED/buttons annunciator

10A power dedicate for signaling circuits
Comes with 4 NAC that can be expanded to 8 NAC; 2 Amp per circuit
2 RS232, 1 USB, and 1 RJ45 port on the panel
4 Optional SLC isolator circuits available (Expandable to 8 isolators Class B)

The FW106S is an intelligent Fire Alarm Control Panel designed for small scale facilities. It is ideally suited for both new and retrofit commercial, institutional, and industrial fire detection and notification applications.
It is a state-of-the-art addressable fire control system that meets the requirements of UL864 10th edition, and ULC-S527.

It can support 1 Addressable Loop Units, for a maximum of 252 addressable devices/points, with 4 Notification Appliance Circuits and 5 form C dry relay contacts.

The FW106S has a 7” LCD display with 800×400 resolution, 6 auxiliary function keys and 9 LED indicators making it a highly intuitive fire alarm user interface. The LCD can display 8 simultaneous events. Users can browse more events by pressing the up/down buttons.

FEATURES
Intelligent Fire Alarm Control Panel designed for small scale facilities
UL/ULC listed according to UL 864 10th Edition and ULC‐S527 3rd Edition requirements.
Ideally suited for both new and retrofit commercial, institutional, and industrial fire detection and notification applications
Supports 1 Addressable Loop Units and 252 addressable devices/points
Supports 2 to 4 Notification Appliance Circuits and 5 form C dry relay contacts
Supports a network of 109 remote annunciators.
Includes a 7” color LCD display with 800×400 resolution, 6 auxiliary function keys and 9 LED indicators making it a highly intuitive firm-alarm user interface
Available in Red or Dark Grey

The FW106 is an intelligent Fire Alarm Control Panel designed for small to medium scale facilities. It is ideally suited for both new and retrofit commercial, institutional, and industrial fire detection and notification applications.
It is a state-of-the-art addressable fire control system that meets the requirements of UL864 10th edition, and ULC-S527.

It can support 4 Addressable Loop Units, for a maximum of 1008 addressable devices/points, with 4 Notification Appliance Circuits and 5 form C dry relay contacts.

The FW106 has a 7” LCD display with 800×400 resolution, 6 auxiliary function keys and 9 LED indicators making it a highly intuitive fire alarm user interface. The LCD can display 8 simultaneous events. Users can browse more events by pressing the up/down buttons.

FEATURES
Intelligent Fire Alarm Control Panel designed for small scale facilities
UL/ULC listed according to UL 864 10th Edition and ULC‐S527 3rd Edition requirements.
Ideally suited for both new and retrofit commercial, institutional, and industrial fire detection and notification applications
Supports 4 Addressable Loop Units and 1008 addressable devices/points
Supports 4 to 10 Notification Appliance Circuits and 5 form C dry relay contacts
Supports a network of 109 remote panels and annunciators.
Includes a 7” color LCD display with 800×400 resolution, 6 auxiliary function keys and 9 LED indicators making it a highly intuitive firm-alarm user interface
Available in Red or Dark Grey

The FW521 is an intelligent Heat Detector UL and ULC listed device according to UL 521 and ULC-S530 for Fire Protective Signaling Systems for indoor use with both fixed-temperature alarm and rate-of-rise alarm characteristics.

FEATURES
UL521/ULC S530
Addressable Heat Detector
Fixed Temperature and rate-of-rise
Comprehensive self diagnostics
Slim design – visually appealing

The FW721 and FW721C addressable Manual Station are UL and ULC listed devices according to UL 38 and ULC-S528 for Fire Protective Signaling Systems for indoor use. It is a normally open initiating device made from durable materials for long lasting performance.

FEATURES
UL38/ULC S528
Addressable Manual Pull Station
LED Indicator when activated
Features a Reset Key
Simple Push plate activation

A neutral white exterior and an unobtrusive, low profile housing make the TD heat detector blend onto any ceiling. The plastic housing fits onto any standard octagon or square electrical box with a trim plate. The unit will protrude no more than 1” below the surface of the finishing ceiling.

Using a bi-metal disc as a heat sensing element, an alarm is initiated when the air temperature exceeds the unit’s rated level. Only when the air temperature decreases below the rated level will the detector automatically reset.

- Self Restoring
- ULC Listed
- Complementary, low profile white exterior
- Mounts onto standard octagon or square box with trim plate
- Automatic reset

The Potter CR-135W is a fixed & rate-of-rise temperature heat detector. The detector consists of a spring-loaded plunger retained by a fusible alloy that releases when the ceiling temperature reaches 135°F (57°C). When released, the plunger strikes a normally open set of contacts and holds them closed.

UL and ULC Listed
Fixed temperature and rate-of-rise operation
Operates when ceiling temperature reaches 135°F (57°C) or rises at 8°C/min rise
Normally open (NO) contacts
Terminal bar with screws for easy wiring

The FW129 is an intelligent remote LED annunciator designed to be used with the FW106/FW106S control panels.

FEATURES
The FW129 is connected to the control panel via the external network to form an emergency detection and notification network system.