All products

The FW721 and FW721C addressable Manual Station are UL and ULC listed devices according to UL 38 and ULC-S528 for Fire Protective Signaling Systems for indoor use. It is a normally open initiating device made from durable materials for long lasting performance.

FEATURES
UL38/ULC S528
Addressable Manual Pull Station
LED Indicator when activated
Features a Reset Key
Simple Push plate activation

A neutral white exterior and an unobtrusive, low profile housing make the TD heat detector blend onto any ceiling. The plastic housing fits onto any standard octagon or square electrical box with a trim plate. The unit will protrude no more than 1” below the surface of the finishing ceiling.

Using a bi-metal disc as a heat sensing element, an alarm is initiated when the air temperature exceeds the unit’s rated level. Only when the air temperature decreases below the rated level will the detector automatically reset.

- Self Restoring
- ULC Listed
- Complementary, low profile white exterior
- Mounts onto standard octagon or square box with trim plate
- Automatic reset

The Potter CR-135W is a fixed & rate-of-rise temperature heat detector. The detector consists of a spring-loaded plunger retained by a fusible alloy that releases when the ceiling temperature reaches 135°F (57°C). When released, the plunger strikes a normally open set of contacts and holds them closed.

UL and ULC Listed
Fixed temperature and rate-of-rise operation
Operates when ceiling temperature reaches 135°F (57°C) or rises at 8°C/min rise
Normally open (NO) contacts
Terminal bar with screws for easy wiring

The FW129 is an intelligent remote LED annunciator designed to be used with the FW106/FW106S control panels.

FEATURES
The FW129 is connected to the control panel via the external network to form an emergency detection and notification network system.

A81PBR PLUG AND CHAIN 2 1/2" (65MM) MALE BCT THREAD

Great for theft protection! The Easy-Off (Kwikap) Cap designed to be secured internally on the inside female thread of the swivel connection. Constructed of cast aluminum with corresion resistant internal set flanges. Set flanges are adjustable to suit any 2 1/2" (65mm) female hose thread. The fire department simply breaks the cap with a hydrant wrench to gain access to the female swivel connections.

A81CB Plug and Chain, 2 1/2" Male Thread CSA Brass
A81CC Plug and Chain, 2 1/2" Male Thread CSA Chrome
A81BB Plug and Chain, 2 1/2" Male Thread BCT Brass
A81BC Plug and Chain, 2 1/2" Male Thread BCT Chrome
A81QB-RB Plug and Chain, 2 1/2" Male Thread QST Rough Brass
A81QB Plug and Chain, 2 1/2" Male Thread QST Brass
A81QC Plug and Chain, 2 1/2" Male Thread QST Chrome
A81NSTB Plug and Chain, 2 1/2" Male Thread NST Brass
A81NSTC Plug and Chain, 2 1/2" Male Thread NST Chrome
A81NFB Plug and Chain, 2 1/2" Male Thread NFLD Brass
A81NFC Plug and Chain, 2 1/2" Male Thread NFLD Chrome
A81NSB Plug and Chain, 2 1/2" Male Thread NSST Brass
A81NSC Plug and Chain, 2 1/2" Male Thread NSST Chrome
A81WB Plug and Chain, 2 1/2" Male Thread WCT Brass
A81WC Plug and Chain, 2 1/2" Male Thread WCT Chrome
A81NB Plug and Chain, 2 1/2" Male Thread NPSH Brass
A81NC Plug and Chain, 2 1/2" Male Thread NPSH Chrome
A81NPB-PR Plug and Chain, 1 1/2" (38mm) Male Thread NPSH Brass
A81NPC Plug and Chain, 1 1/2" (38mm) Male Thread NPSH Brass
A81NSTB Plug and Chain, 1 1/2" (38mm) Male Thread NST Brass
A81NSTC Plug and Chain, 1 1/2" (38mm) Male Thread NST Brass

Single jacket 100% virgin high tenacity polyester hose inteded for interior and occupant use applications in builiding and plants. UL/ULC listed hose. Standard stocking lengths are 50', 75' and 100' with brass our rough chrome couplings. Polished chrome couplings available upon request.

Multipurpose SR is a PVC coated reel hose. Our most economical non collapsible hose; standard on all our model HRS-038 continuous flow hose reels. The smooth PVC jacket allows for quick and easy clean up. Suitable for fire protection or industrial applications. Tested by European, Australian and Malaysian laboratories to European Standard EN 694 and Australian Standard AS 1221. Not suitable for freezing temperatures. Available in 1" x 100' lengths. For a multipurpose hose that remains functional in cold temperatures, try our regular Multipurpose with EPDM jacket.

The ultimate reel/hose combination for industrial washdown! Operates in seconds, packs away in seconds. The 1” diameter PVC coated hose is both rugged and easy to clean.

• Side Plate powder painted finish red
• PVC coated, non collapsible hose
• Threaded Inlet connection
• Outlet connection for hose can be rotated for left and right direction
• Fog/straight stream nozzle
• Waterways made from non ferrous metals; for corrosion protection
• Maximum working pressure: 215 Psi, test pressure: 290 Psi

Model HRS-038-12 is our standard stocking reel which comes with 1" x 98' hose and red nozzle. Factory tested.

All other models are special order and may require minimum quantities. Contact customer service for more details.

Stopper II consists of a clear, tamperproof, super tough polycarbonate shield and frame that fits over manual pull stations. When lifted to gain access to the actual alarm, it sounds a piercing 95 dB or 105 dB warning horn. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

STI-1100 FEATURES

• Cover is UV-stabilized against sun deterioration.
• Lifetime guarantee against breakage of polycarbonate cover in normal use (one year on electronic components).
• 95 dB or 105 dB self-contained alarm. Complete with battery.
• STI-1100 is for flush mount pull stations (Surface - see STI-1130).
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
• FM Approved.
• Polycarbonate rated -40'F to 120'F ( -40'C to 49'C).
• Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).

Note: End user must verify the alarm and battery every six months and replace battery annually or as required.

Designed for use in close quarters, this compact fire blanket is an excellent emergency fire shield or cover to either contain a fire or to aid your egress safely in the event of a fire. Wall-mountable case has 2 quick release pull tabs situated on the bottom for quick & easy bottom deployment.

Applications include:

Large or small watercraft

Commercial / Institutional kitchens

y 8"x17"x5" c/w 1/4" return frame (5" recessed)

8"x17"x5" c/w 1" return frame (suitable for 4" stud walls)

14"x30"x4" c/w 1" Return frame (suitable for 4" stud)

tory 9"x24"x6" c/w 1/4" Return frame (6" recessed)

9"x24"x6" c/w 2" Return frame (4" recessed)

Williams Brothers

Elite Series Cabinet is the ideal choice for virtually any architectural specification. Built with precision and durability in mind, these attractive cabinets are available in a variety of mounting styles, including recessed, semi-recessed and surface mounted. The fronts are 16-gauge cold-rolled steel with 22-gauge cold-rolled steel tubs.

Features:
Wall Mount Style: Recessed, Semi-recessed, Surface
Hinge: Continuous piano hinge, Invisible SOSS hinge standard on stainless steel cabinet
Latch: Stainless steel paddle latch
Standard Door Style: Full glass panel
Door Style Options: Vertical duo
Full metal: Full metal break glass
Standard Finish: Super durable white powder coat finish

Keyed cylinder lock (151 key code)
Stainless steel #304 or #316 with #4 satin finish
Custom sizes and finishes available
Vertical and horizontal vinyl decals "Fire Extinguisher" in colours red, black or white

Vinyl Sign

12x8 vinyl Decal